Comparison Study of core spun yarns properties of some cellulosic fibers

Document Type : scientific articles

Authors

1 Professor of Engineering & Knitting Technology - Spinning & Weaving Department Faculty of Applied Arts- Helwan University.

2 Researcher in the Research Department of the Ready-made Garments and knitting Industry, the Textile Industries Division, the National Research Center.

3 Assistarnt Lecturer, Department of spinning, weaving and knitting Faculty of Applied Arts, Benha University

4 Professor of weaning and spinning engineering, weaving and spinning department faculty of applied arts, Hewlan University

Abstract

The knitted fabrics industry in the world has developed greatly, especially in recent years, to the extent that it has become competitive with woven fabrics, and by studying the factors that lead to the prosperity of this industry, it becomes clear that they are many factors, the most important of which are the use of industrial fibers, and the development of the properties of natural threads, with the consumer acceptance of knitting products of all kinds on the basis of They are in line with fashion and give comfort in terms of flexibility and good suitability for the end use in addition to their cheap price due to the low costs of their production. The progress and development of the production of knitting machines led to the expansion of the use of knitted products, not only in the field of traditional clothing, but these fabrics entered into industrial uses, home furnishings and clothing Sports and medical, with special uses, and others, especially when using core spun yarns by combining the characteristics of different raw materials. It consists of two parts, the core and the sheath. The core is a continuous filament in the center covered with short filaments in the sheat. This is generally called the core spun yarn.

Keywords

References

المراجع
المراجع العربية:
1-     طارق صبحي مصطفى هنداوى( 2016):" تصميم الخيوط المحورية من الألياف المعالجة بمواد ذات القدرة على التحکم الحراري "pcm" وتوظيفها في أقمشة ذکية تصلح کملابس داخلية لاستخدامها في الأجواء الحارة"- رسالة دکتوراه- کلية الفنون التطبيقية -جامعة حلوان.
1-      tariqsubhimustafaahindawaa( 2016):" tasmimalkhuyutalmihwariat min al'alyafalmuealijatbimawadadhatalqudratealaaaltahakumalhararii "pcm" watawzifiha fi 'aqmishatdhakiattasluhkamalabisdakhiliatliaistikhdamiha fi al'ajwa' alharati"- risalatdukturah- kuliyatalfununaltatbiqiat - jamieathulwan.
 
المراجع الاجنبية:
2-SaitYilonu and Belkiszerventunal, “Investigating the Effects of Core Spun Yarns on the Quick Dry property of Towels,” Fibres and Textiles in Eastern Europe 26,no. 3 (2018): pp. 46 – 51 .
3- Textile Spinning – Textile Technology Knowledge Series, Volume II  TEXCOMS TEXTILE SOLUTIONS 21 APRIL  ,(2019).
4- Mohsen shanbeh, HosseinHasani and FatemhYouseffiManesh, “ An investigation into the fatigue behavior of Core   spun yarns under Cyclic tensile loading journal of Engineered Fibers and Fabrics, ” Isfahan Iran 7,no.4 , (2012): pp. 95 – 103.                                                                           
5- C. prakash and K. theangamahn, “ establishing the effect of loop length on dimensional stability of single jersey knitted fabric mad from cotton/lycra core spun yarn,” Indian Journal of Science and Technology India l3 ,no.3  (Mar 2010) .
6- Young fumei want1.2 , “Structural design and physical characteristics of modified ring spun yarns intended for  textiles,”: A comparative study textile research Journal China   89 no.2 , (2019): pp .121 – 132 .
7- Gamze kilic1, Bekir yildirim1, Halil Ibrahim celik2, Sumeyye  Ustuntag1 and HuseyinGzai Turksoy1,“the effects of production parameters on the core visibility ratio of dual core yarns,” Teksilvekonfecksiyon Turkey30no.1, (2020):pp 3-9  .
8- Dereje, BerihumSitotwa and BirunFentahunAdamy , “Tensile properties of single jersey and 1 x 1 rib knitted fabrics made from 100% cotton and cotton/lycra yarns , ” Textile Research Journal of Engineering Ethiopia  1(2017):pp.1-7.
9- M. miao – core spun yarn –in electronic textiles (2015) –Since Direct.
10- F. Marsal1, D.palet1, A. serra2, l. Indrie, M, Ratiu3, “New Development In the core yarns manufacture, ”Annals of the University of Oradea Fascicle of Textiles LeatherWork American 1,no. 2 , (2010):pp. 86 – 90  .
11- Dr. Mohamed A. Saad and Dr. Yehia El Mogahzy , “  Development of Synthetic core Cotton, sheath Friction spun yarns suitable for specialty Industrial fabrics/ Garments ,”  Journal of Industrial Engineering Research Egypt1,no. 4 , (2015) :pp. 123-128 .
12- S. Esin and B OsmanAni , “ Fatigue Behavior of Core Spun Yarns Containing Filament by means of Cyclic dynamic loading top Conference Series ,” Materials Science and Engineering Turkey 254,no.8(2017):pp.1-6.
13-Subrata kumarsaha, “Defects and Quality Optimization of Core  Spun Yarn Containing Spandex , ”Textile Research Journal Bangladesh  1, no.1(2010):pp156-159. 
14- P.proamanik1, vilas. M. patil2 , “Physical Characteris Using Ring and Air-jet Systems, ” Autex Research Journal India 9, no.1 (2009):pp. 14 – 19   .
 
مواقع الانترنت:                                                                                               
15- http:/www.acadmia.edu/14922575/production-and properties of  core spun yarns  and  precaution to be taken prakash CV Mr -Academia.edu.

Files

Share

How to cite

Statistics