Study Of Knit Fabric Characteristics Made Of Core Spun Yarns

Document Type : scientific articles

Authors

1 Knitting, weaving and spinning department-faculty of applied arts -Helwan university.

2 Researcher in the Research Department of the Ready-made Garments and knitting Industry, the Textile Industries Division, the National Research Center.

3 Assistarnt Lecturer, Department of spinning, weaving and knitting Faculty of Applied Arts, Benha University

4 Professor of weaning and spinning engineering, weaving and spinning department faculty of applied arts, Hewlan University

Abstract

Given the importance of knitting fabrics as one of the types of clothing fabrics, attention must be paid to achieving the best functional and aesthetic properties by using core spun yarns with different raw materials with distinct natural and physical properties of poly acrylic and wool sheath with polyester core, using a modified ring spinning system, using the weft knitting method on circular machines with knit structures; single jersey, rib and interlock . By applying analysis of variance it has found that there is a significant effect of the studied factors on properties of Number of rows / inch - Number of columns / inch - Fabric thickness (mm), Weight per square meter (g), air permeability cm3/cm2.w ,bursting strength (KPa). Fabric Width (cm), Water Absorption (s), spirality Angle (°)
Stitch length (mm) – longitudinal and transverse shrinkage (%). The quality assessment was performed by calculating the quality factors of the produced fabrics. The samples produced with acrylic material achieved a relatively better quality factor and better performance properties than those produced with wool.
The required specifications for threads in the knitting industry are that they should be of high flexibility - have high uniformity - have bendability to form stitches - that the thread is characterized by sufficient strength required - the twisting force in knitting threads is no more than 3.6 except in special structures in the case of weft knitting It ranges between 2 - 3.2.

Keywords

References

  1. المراجع:

    المراجع العربية

    1. مني السمنودي.2001م  " کتاب تصميم و تکنولوجيا التريکو"- دار الفن والتصميم للطباعة والنشر-.

    1. mani alsimnudi.2001m " kitab tasmim w tiknulujia altiriku"- dar alfani waltasmim liltibaeat walnashri-  . 

     2- هبة محمد ابراهيم درويش (2008): "دراسة بعض متغيرات ماکينة التريکو الدائري المؤثرة على خصائص ثابت الأبعاد للأقمشة المنتجة من خيوط محورية بمواصفات مختلفة" ـ رسالة ماجستير ـ کلية الفنون التطبيقية ـ  جامعة حلوان.

    2. hibat muhamad abrahim darwish 2008: dirasat baed mutaghayirat makinat altiriku aldaayirii almuathirat ealaa khasayis thabit al'abead lil'aqmishat almuntijat min khuyut mihwariat bimuasafat mukhtalifatin, risalat majistir,kuliyat alfunun altatbiqiati jamieat hulwan,. 

    3- طارق صبحي مصطفى هنداوى (2016): "تصميم الخيوط المحورية من الألياف المعالجة بموادزات القدرة على التحکم الحراري "pcm" وتوظيفها في أقمشة ذکية تصلح کملابس داخلية لاستخدامها في الأجواء الحارة" ـ رسالة دکتوراه ـکلية الفنون التطبيقية ـجامعة حلوان.

    3-Tariq subhi mustafaa hindawaa 2016: tasmim alkhuyut almihwariat min al'alyaf almuealijat bimuadazat alqudrat ealaa altahakum alhararii "pcm" watawzifiha fi 'aqmishat dhakiat tasluh kamalabis dakhiliat liaistikhdamiha fi al'ajwa' alharati, risalat dukturah, kuliyat alfunun altatbiqiati, jamieat hulwan. 

    4- محمد صبري، (2000)، خامات النسيج  

    4- muhamad sabri, 2000, khamat alnasij 

    5- خميس حنفي ابو السعود، (2004) " التراکيب النسجية لاقمشة التريکو"، صندوق دعم صناعة الغزل والمنسوجات.

    5- khamis hanafi abu alsaeuda.,2004 " altarakib alnasjiat laqimishat altiriku", sunduq daem sinaeat alghazl walmansujat,.

    المراجع الاجنبية

    1. Amany Khalil, Abdelmonem Fouda, Pavla Tesionva and Ahmed Eldeeb ,  “Comaprehensive assessment of the properties of cotton single jersey knitted fabrics produced from different lycra states,” Autex Research Journal21,no.1(2021):pp.71-78.
    2. M. Senthikumar, N. Anbumani and J Hayavadana, “ Elastane Fabrics A tool for Stretch Applications Insports,” Indian Journal of Fibre.  36, (2011): pp 300 – 307.
    3. T Bedez Ute1 and H Kadoglu1, “The Effects of core material parameters on the mechanical properties of double core and single core spun yarns,” Rop conference series: materials science and Engineering Turkey. 459 ,(2018).
    4. Shubham Geete, Shreyansh Shah, V.S. Shivankar, P.P. Raichurkar,”Optimization of Knit Fabric by Uising Different Spinning Methods,” .4, no(3) (2018): pp. 32 – 37.
    5. K.Rajendrakumar and G Thilagavathi , “A study on the effect of construction parameters of metallic wire/core spum yarn based knitted fabrics on electromagnetic shielding,” Journal of Industrial Textiles .42,no (4) (2012): pp. 400 – 416.  
    6. V. kumar, Guluma Sorsa and Prakash, “  Investigation on Geometric and Dimensional Properties of Cotton Sheath Elastomeric Core Spun Yarn Single Jersey and Popcorn Jersey and Fashion Designing ,”India. 2,no(1) (2018).
    7. Qlena Kyzmchuk and livdmyla Melnyk , “ Stretch properties of elastic knitted fabric with pillar stitch,” Journal of Engineering Fibers and Fabrics(2018):pp1- 10.
    8. Saber Ben Abdessalem, Youssef Ben Abdelkader, Sofiene Mokhtar, ph.D, Saber Elmarzougui, ph.D., “ INfluence of Elastane Consumption on Plated Plain Knitted Fabric Characteristics,” Journal of Engineerd Fibers and Fabrics . 4, no (4) (2009):pp.30 – 35.
    9. S.Sundaresan Kandhavel. A, Kiruba. H, Prasanth. S, Sathyapriya and S.A , “Investigations of Core Yarn Properites Produced From conventional Ring Spinning Frame using Newly Designed Core Yarn Mechanism,” 3 ,no( 2) (2017): pp 1757 – 1760.
    10. Sevim Humeyra Clikkan Aydogdu, Demet Yilmaz, “ Analyzing Some of the Dual–Core Yarn Spinning Parameters on Yarn and Various Fabric Properties,”Turkey on . 29 ,no(3) (2019): pp 197 – 207.
    11. Sait Yilonu and Belkis Zervent Unal ,”Investigating the effects of core spun yarns on the Quick Dry property of Towels ,”Fibres & Textiles in Eastern Europe . 26 no, (3) (2018): pp 46 – 51.
    12. LIoyd N Llouv ,  Qasim Siddiqui, Edison Omollo and Chongwen Yu,”PHysical Properties of Plain Single Jersey-Knitted Fabrics Made from Belended and Core Spun polysulafonamide/cotton yarns,” Textile Reaserch Journal 58no,(3) (2014): pp1-10 .
    13. Kaynak Hk,” Effects of Elastane Draw Ratio of Core Spun Yarn on Air Permeability and Bursting Strength of Bi-Stertch WovenFabrics,”TextileScience & Engineering Journal . 7no (6) (2017):pp. 2-7 (2017).
    14. Tao Hua, Ngo S Wong and Wai M tang ,”Study on Properties of Elastic Core Spun Yarns Containging a Mix of Spandex and PET /PTT Bi-Component Filament as Core,” Textile Research Journal 88no, (9) (2018):pp. 1065- 1076.
    15. S. Esin and B Osman Fatigue ,”Behavior of core-dynamic loading top conference series,” Materials science and Engineering (2017).
    16. Bilal qadir, tanveer Hussain, Mumtaz Malik, PHD ,”Effect of Elstane Denier and Draft ratio of Core Spun Cotton Weft yarns on The Mechanical Properties of Woven Fabrics,” Journal of Engineered Fibers and Fabrics vol. 9no, (1) (2014):pp 23 – 31 (2014).
    17. Merve Kucukali Ozturk, Banu Nergis and Cevza Candan Astudy of Wicking Properties of Cotton-Acrylic Yarns and Knitted Fabrics,” Textile Research journal 81no, (3) (2011):pp 324 – 328.
    18. 23.              Dereje, Berihun Sitotwa and Biruk Fentahun Adamy ,” Tensile properties of single jersey and 1 x 1 rib knitted fabrics made from 100% cotton and cotton/lycra yarns ,” Textile Research Journal of Engineering no(1)2017:pp.1-7.

     

Files

Share

How to cite

Statistics